Explore more publications!

Deep Semi Massive Sulphide Zinc, Silver and Gold Intersection at Berrigan Property

ROUYN-NORANDA, Quebec, Jan. 29, 2026 (GLOBE NEWSWIRE) -- Chibougamau Independent Mines Inc. (CBG-TSXV in Canada, CLL1-Frankfurt, Stuttgart, Berlin and Lang & Schwarz Stock Exchanges in Germany, CMAUF-OTC in the US), herein called Chibougamau, is pleased to update shareholders as regards recent drilling reported by TomaGold Corporation (LOT-TSXV, TOGOF-OTCPK) on the Berrigan property located west of the town of Chibougamau, under option from Chibougamau Independent Mines Inc. Updated option terms were published in a Chibougamau Independent press release dated September 30, 2025 accessible by clicking here.

Tomagold has published assay results for two drill holes TOM-25-015 and TOM-25-014 as follows:

  • Drill hole TOM-25-015 (from 451.20 m): 5.75% ZnEq (1.34 g/t AuEq) over 98.5 m
    • Including: 26.67% ZnEq (6.26 g/t AuEq) over 4.90 m
    • Including: 7.26% ZnEq (1.69 g/t AuEq) over 49.35 m
    • Including: 10.26% ZnEq (2.39 g/t AuEq) over 14.60 m, 9.94% ZnEq (2.31 g/t AuEq) over 3.25 m, and 14.82% ZnEq (3.45 g/t AuEq) over 6.20 m
  • Drill hole TOM-25-015 confirms the discovery of a new major semi-massive sulfide zone, named Berrigan Deep, which remains open at depth 
  • Drill hole TOM-25-014 (from 185 m): 28.69% ZnEq (6.73 g/t AuEq) over 2.10 m

For more details, shareholders may access the Tomagold press release by clicking here.

Tomagold states that “Drill hole TOM-25-015, grading 5.75% ZnEq (1.34 g/t AuEq) over 98.5 m, is truly transforming the Berrigan Mine project and highlights a new semi-massive sulfide zone that extends at depth beneath the known zones. This very encouraging result suggests the presence of a large mineralized system that remains open at depth.”

The drill holes contain significant secondary silver and gold mineralization. The table below provides the breakdown of individual assays.

Results from drill holes TOM-025-014 and TOM-025-015: Berrigan Mine project

Hole ID From
(m)
To
(m)
Length
(m)
ZnEq
(%)
AuEq
(g/t)
Au
(g/t)
Ag
(g/t)
Cu
(ppm)
Zn
(ppm)
TOM-25-014 185.00 187.10 2.10 28.69 6.73 4.94 56.44 545 45509
  238.70 239.85 1.15 23.29 5.43 2.63 22.20 1590 104000
  251.20 252.60 1.40 41.79 9.80 7.44 37.30 552 80400
  405.30 406.70 1.40 14.99 3.48 1.13 13.15 655 92514
  423.30 426.30 3.00 2.34 0.54 0.07 5.45 493 15700
  451.50 457.50 6.00 1.34 0.31 0.08 3.45 77 7882
TOM-25-015 132.55 141.00 8.45 4.22 0.99 0.51 5.51 338 16610
  155.70 157.70 2.00 31.75 7.42 4.66 26.90 684 102850
  182.10 202.20 20.10 2.55 0.60 0.36 3.20 265 7687
  451.20 549.70 98.50 5.75 1.34 0.82 3.21 386 19751
including 452.20 457.10 4.90 26.67 6.26 4.69 18.80 2897 47876
and including 500.35 549.70 49.35 7.26 1.69 0.90 3.48 310 31250
Including 521.00 535.60 14.60 10.26 2.39 1.34 5.91 420 41158
Including 537.85 541.10 3.25 9.94 2.31 0.88 3.85 529 58200
Including 542.00 548.20 6.20 14.82 3.45 1.63 5.26 511 74276

Notes:

  • The reported widths represent core lengths. True width is estimated to be approximately 80-85% of the core length, depending on the deviation angles.
  • ZnEq and AuEq are calculated using the Company’s standard parameters.
  • AuEq calculation was based on US$4150/oz Au, $51.36/oz Ag, US$5.044/lb. Cu and $1.398/lb Zn. AuEq = Au g/t + (Ag g/t × 0.01237) + (Cu ppm × 0.000083) + (Zn ppm × 0.000023). The use of AuEq is to calculate cut-off grades for exploration purposes, and no adjustments were made for metal recovery. The Company is currently in the initial exploration phase, following historical drilling. At this stage, the Company does not have any metallurgical data and no comparative studies have been conducted, given the geological complexity of the ultramafic host rock. Furthermore, the Company is not aware of any deposits that may have similar geological characteristics.
  • ZnEq calculation was based on US$4047/oz Au, $50.22/oz Ag, US$4.796/lb. Cu and $1.390/lb Zn. ZnEq = Zn ppm + (Ag g/t × 527) + (Au g/t x 42466) + (Cu ppm × 3.45) / 10,000. The use of ZnEq is to calculate cut-off grades for exploration purposes, and no adjustments were made for metal recovery. The Company is currently in the initial exploration phase, following historical drilling. At this stage, the Company does not have any metallurgical data and no comparative studies have been conducted, given the geological complexity of the ultramafic host rock. Furthermore, the Company is not aware of any deposits that may have similar geological characteristics.

Drill Hole TOM-25-015: A Major Discovery at Depth

Drill Hole TOM-25-015: A Major Discovery at Depth 

This press release was written by Jack Stoch, P. Geo., President and CEO of Chibougamau Independent Mines Inc. in his capacity as a Qualified Person (Q.P.) under NI 43-101.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.


We Seek Safe Harbour.
CUSIP Number 167101 203
LEI 529900GYUP9EBEF7U709


For further information, contact:
Jack Stoch, P.Geo., Acc.Dir.
President & CEO
Chibougamau Independent Mines Inc.
86, 14th Street
Rouyn-Noranda, Quebec Canada J9X 2J1
Tel.: 819.797.5242
Fax: 819.797.1470
info@chibougamaumines.com
www.chibougamaumines.com


Forward-Looking Statements

Except for historical information this News Release may contain certain “forward looking statements”. These statements may involve a number of known and unknown risks and uncertainties and other factors that may cause the actual results, level of activity and performance to be materially different from the Companies expectations and projections. A more detailed discussion of the risks is available under “disclaimer” on the Company’s website.

A map accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/2f2e13be-17d4-4c01-9b16-1957e866fc41


Primary Logo

Drill Hole TOM-25-015: A Major Discovery at Depth

Drill Hole TOM-25-015: A Major Discovery at Depth

Legal Disclaimer:

EIN Presswire provides this news content "as is" without warranty of any kind. We do not accept any responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you have any complaints or copyright issues related to this article, kindly contact the author above.

Share us

on your social networks:
AGPs

Get the latest news on this topic.

SIGN UP FOR FREE TODAY

No Thanks

By signing to this email alert, you
agree to our Terms & Conditions